Nov 05, 2026 Leave a message

Assembly status of the Kiande MV switchgear production line

In a typical medium-voltage (MV) switchgear assembly workshop, cabinets are repeatedly lifted and lowered-positioned into place, fitted with current transformers (CTs), and later equipped with door panels and instrument compartments. This traditional approach is highly inefficient.

 

Kiande's MV switchgear production line (model KD-MVZPX-20-50) offers a straightforward solution: it delegates the movement of these units to rail-guided vehicles (RGVs). The cabinets advance automatically from one workstation to the next according to a set rhythm, eliminating the need for pauses while waiting for manual intervention. The entire line-spanning from initial cabinet assembly through final testing to packaging and delivery-is organized with dedicated operator stations and buffer zones, with equipment and temporary storage areas strategically arranged to match the production workflow. This fundamental difference is what determines the level of quality and efficiency achieved.

 

11

 

01 Why It Is Difficult to Create a Continuous Production Line for Medium-Voltage Switchgear

 

Low-voltage switchgear can be designed to be relatively lightweight and compact. Medium-voltage switchgear, however, presents a different challenge: the units are large and heavy. Moving a single unit with an overhead crane takes several minutes, and precise positioning requires manual adjustment. Furthermore, the production process is extensive-enclosure assembly, current transformer (CT) installation, door panel mounting, instrument cabinet installation, wiring, and factory testing. If any single step slows down, the entire production line comes to a halt.

 

Testing, in particular, must be handled as a distinct phase. Procedures such as withstand-voltage tests and circuit resistance measurements require a dedicated, cordoned-off area with sufficient safety clearance, which occupies a significant amount of space. Integrating the testing area directly into the assembly area would pose unacceptable safety risks.

 

Therefore, to achieve a truly continuous production line, three issues must be addressed simultaneously:

 

1. Seamless Transport: Moving units from one workstation to the next must not rely on overhead cranes or manual labor, nor should it require waiting for lifting equipment to become available.

2. Flexible Workstations: If a specific workstation experiences a brief delay, there must be a buffer space for units to wait, preventing a bottleneck that would stall upstream operations.

3. End-to-End Visibility: The status of every workstation-whether it is congested or idle-must be immediately apparent along the line, rather than discovering issues only when a backlog of finished units piles up at the exit.

 

02 How a Switchgear Unit Moves from Assembly to Dispatch on the Kiande Production Line

 

The backbone of Kiande's MV switchgear production line consists of a track system paired with a set of RGV (Rail Guided Vehicle) carts. The switchgear enclosures are placed onto the carts, which transport them sequentially from one workstation to the next; the carts handle all inter-station movement, allowing operators to focus exclusively on assembly tasks at each station. Compared to overhead crane transport, these carts follow a fixed path and offer smooth acceleration and deceleration. This ensures the enclosures remain stable-without swaying in mid-air-and eliminates the need for repetitive, time-consuming adjustments when positioning them at each workstation.

 

In the assembly section, the framework is positioned using an automated, reverse-alignment system, which includes two dedicated assembly bays. Once an enclosure enters a bay in reverse, a positioning mechanism automatically aligns it, eliminating the need for manual visual checks or adjustments. For medium-voltage switchgear, any deviation during the framework assembly stage would propagate downstream-affecting the fit of door panels and instrument compartments-so precise initial alignment significantly reduces the need for rework later on.

 

Further along the line, assembly tasks are segmented: current transformers (CTs) are installed by robotic manipulators, while door panels and instrument compartments can be installed either manually or by industrial robots. Once fully assembled, the switchgear units move into a testing zone-enclosed within a 6000×6000×2800mm area-where they undergo all required pre-shipment tests. After passing these checks, they proceed to the packaging and dispatch stage.

 

The entire line is controlled via a PLC network, with the operational status of every station consolidated into a single interface. Operators at the line-side terminals can monitor the status of the entire production flow and identify any bottlenecks. The true value of this setup lies not merely in "digitization," but in the ability to pinpoint the exact location of an issue the moment it arises.

 

The inclusion of dedicated operator stations and buffer zones between assembly stages is what enables the line to run continuously. Operator stations ensure that personnel and switchgear units meet at fixed, predictable locations, so workers don't have to chase the units down the line. Buffer zones, meanwhile, absorb any discrepancies in cycle times between consecutive stations. Without these buffers, a slight delay at any single station would cause the entire production line to grind to a halt, leaving every subsequent station waiting.

 

03 How to Configure Manual Labor, Manipulators, and Industrial Robots

 

This production line offers three types of setup, but a more advanced configuration is not necessarily better. The right choice depends on the stability of the cabinet design, the production batch size, and the capabilities of your existing manufacturing processes.

 

Configuration Method

Suitable Scenarios

Manual Hoisting

(Door Panels, Instrument Cabinets)

Given the high variety of enclosure types and relatively small batch sizes, the existing overhead cranes and lifting gear in the factory can be directly reused.

Low investment; production pace is controlled by the operator.

Robotic Arm

(CT Installation)

The weight and installation position of the CT are relatively fixed, and the task involves many repetitive motions.

By using a robotic arm to remove this step from the manual workflow, the cycle time for the entire line becomes more stable.

Industrial Robots

(Door Panels, Instrument Cabinets)

Stable, high-volume production with a focus on standardized enclosure types, aiming for consistent cycle times and long-term labor savings.

 

In actual projects, a common configuration is to use a robotic arm for the CT (current transformer) components, while handling door panels and instrument cabinets via manual lifting-transitioning to robotics only once production volume has stabilized. This approach keeps initial investment manageable and prevents the process from becoming a bottleneck during product changeovers due to an over-reliance on automation.

 

04 Which types of factories are suitable for this system?

 

The positioning of an MV (medium-voltage) switchgear production line is very clear: it is designed to address the handling, waiting, and consistency of switchgear enclosures as they move between production stages-it does not address the design of the switchgear itself or the manufacturing processes. Therefore, when deciding whether to implement such a line, the key question is whether your primary bottlenecks lie in those three specific areas.

 

  . Production volume for medium-voltage switchgear is on the rise, and the handling and waiting times during the assembly phase have become bottlenecks for capacity.

  ·The facility is transitioning from manual assembly to automation, with the goal of first establishing a continuous flow before gradually replacing individual manual tasks at specific workstations.

  ·Production batches are large, and there is a requirement for consistent assembly quality-from the initial installation of the enclosure to final factory testing-to minimize rework caused by issues during positioning or lifting.

 

FAQ

 

Q1 If we want to increase the level of automation later on, will the production line need to be rebuilt?

For the door panel and instrument cabinet assembly stages, the workstations are designed to support both manual lifting and industrial robotic handling. Transitioning from manual to robotic operations is simply a reconfiguration of the existing workstations-there is no need to dismantle and rebuild the entire line. Furthermore, the installation and securing of CT components are already handled by robotic manipulators.

 

Q2 Can the control system be integrated with our existing factory systems?

This production line utilizes a PLC network to aggregate the status of each workstation into a unified interface, allowing for real-time monitoring of the entire line's operation from the shop floor. Integration with an MES or other proprietary management systems is also possible; this would involve specific interface protocols and data fields, which can be confirmed on a project-by-project basis as needed.

 

Suzhou Kiande Electric Co., Ltd., based in Suzhou, is a manufacturer of production equipment for switchgear. The company primarily supplies assembly lines and auxiliary equipment to manufacturers of medium- and low-voltage switchgear. Its offerings include production lines for medium- and low-voltage switchgear-as well as for draw-out type switchgear-packaging platforms, and a range of busbar processing machinery (including CNC, hydraulic, and multifunctional models). The company also provides related components, such as busbar connectors and outlet shrouds.

 

For switchgear manufacturers looking to expand production capacity or transition from manual assembly to a continuous-flow process, the value of a supplier like Kiande extends beyond individual pieces of equipment; it lies in their ability to integrate cabinet assembly, testing, and delivery into a cohesive production line that can be scaled according to capacity requirements.

Send Inquiry

Home

Phone

E-mail

Inquiry