Before use, check that the plug and power cord are normal. Connect the power supply and turn on the power switch (green for on/red for off). During normal operation, there is no need to turn off the switch; disconnect the power when not in use.
Before operation, carefully read the instruction manual to familiarize yourself with the machine's structure, performance, and operating methods. Before starting the machine, fill the oil tank with oil. If the ambient temperature is below 0℃, run the machine idle for a few minutes first. During operation, do not place your hands or body parts between the upper and lower dies (blades). Do not place any objects on the worktable. Select the appropriate die clearance according to the material thickness. When multiple people are operating the machine, a designated person should supervise. The machine must be stopped when changing dies. After operation, shut down the machine in the following order: first turn off the working buttons of each unit, then turn off the power switch on the control panel, and finally turn off the main circuit and workshop power switches.
